Skip Navigation
TSTC students and employees: Click here for TSTC Portal.

Welcome to our list of course offerings. You can search for specific courses by name, campus, semester, and more by clicking on the arrow tab on the left.

Click on a course below to view more information like course description, pre-requisites, syllabus, and more. If a syllabus is missing, please contact the TSTC Helpdesk at 800 592-8784 or email us at TSTCHelpdesk@tstc.edu for assistance.

Course Schedule

Spring 2020 - All Campuses
 
?
CourseTitleCourse/TitleCreditsInstructorScheduleCampusSylCV
ABDR-1203-1002Veh Design/Structural Analysis
ABDR-1203-1002
Veh Design/Structural Analysis
Waco
2Kyle Pokraka
T  -  8:00 am - 8:55 am
T  -  9:00 am - 10:50 am
WacoCourse Syllabus
Course Credits:   2
Course Description:
An introduction to the collision repair industry with emphasis on safety, professionalism, and vehicle structural design.
Instructor:   Kyle Pokraka
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 2 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureTuesdays8:00 am - 8:55 am
1FC1, room 107
Hands-On LabTuesdays9:00 am - 10:50 am
1TTC, room 120
Syllabus:
ABDR-1215-1002Vehicle Trim and Hardware
ABDR-1215-1002
Vehicle Trim and Hardware
Waco
2Kyle Pokraka
T  -  11:00 am - 11:55 am
T  -  1:00 pm - 2:50 pm
WacoCourse Syllabus
Course Credits:   2
Course Description:
A study of vehicle trim and glass service.
Instructor:   Kyle Pokraka
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 2 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureTuesdays11:00 am - 11:55 am
1FC1, room 107
Hands-On LabTuesdays1:00 pm - 2:50 pm
1TTC, room 120
Syllabus:
ABDR-1307-1001Collision Repair Welding
ABDR-1307-1001
Collision Repair Welding
Waco
3Jannifer Stimmel
M  -  1:00 pm - 2:50 pm
W  -  8:00 am - 11:40 am
Waco
Course Credits:   3
Course Description:
A study of industry and standard welding and cutting procedures.
Instructor:   Jannifer Stimmel
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 2 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureMondays1:00 pm - 2:50 pm
1TTC, room 119
Hands-On LabWednesdays8:00 am - 11:40 am
1ACR, room 100
ABDR-1307-2001Collision Repair Welding
ABDR-1307-2001
Collision Repair Welding
Harlingen
3Joseph Cantu
M  -  9:00 am - 11:00 am
M  -  11:00 am - 12:00 pm
M  -  1:00 pm - 4:00 pm
HarlingenCourse Syllabus
Course Credits:   3
Course Description:
A study of industry and standard welding and cutting procedures.
Instructor:   Joseph Cantu
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 3 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureMondays9:00 am - 11:00 am
200F, room 109
Hands-On LabMondays11:00 am - 12:00 pm
200F, room 112
Hands-On LabMondays1:00 pm - 4:00 pm
200F, room 112
Syllabus:
ABDR-1349-1002Auto Plastic & Sheet Mold Rpr
ABDR-1349-1002
Auto Plastic & Sheet Mold Rpr
Waco
3Jannifer Stimmel
Th  -  11:00 am - 12:50 pm
Th  -  8:00 am - 10:45 am
Waco
Course Credits:   3
Course Description:
A comprehensive course in repair of interior and exterior plastics including the use of various types of adhesives.
Instructor:   Jannifer Stimmel
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 2 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureThursdays11:00 am - 12:50 pm
1TTC, room 119
Hands-On LabThursdays8:00 am - 10:45 am
1ACR, room 100
ABDR-1359-1001Sheet Metal Fabrication I
ABDR-1359-1001
Sheet Metal Fabrication I
Waco
3Tracy Marshall
M  -  8:00 am - 9:50 am
M  -  10:00 am - 12:45 pm
WacoCourse Syllabus
Course Credits:   3
Course Description:
A study of the basic shaping techniques required for fabricating sheet metal parts and pieces. Discussion will include custom cars and street rods.
Instructor:   Tracy Marshall
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 2 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureMondays8:00 am - 9:50 am
1FC1, room 106
Hands-On LabMondays10:00 am - 12:45 pm
1FC1, room 132
Syllabus:
ABDR-1359-2001Sheet Metal Fabrication I
ABDR-1359-2001
Sheet Metal Fabrication I
Harlingen
3Joseph Cantu
T  -  1:00 pm - 3:00 pm
T  -  3:00 pm - 6:00 pm
HarlingenCourse Syllabus
Course Credits:   3
Course Description:
A study of the basic shaping techniques required for fabricating sheet metal parts and pieces. Discussion will include custom cars and street rods.
Instructor:   Joseph Cantu
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 2 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureTuesdays1:00 pm - 3:00 pm
200F, room 109
Hands-On LabTuesdays3:00 pm - 6:00 pm
200F, room 112
Syllabus:
ABDR-1371-1002Basic Paint Tchnqs, Eqpt Envn
ABDR-1371-1002
Basic Paint Tchnqs, Eqpt Envn
Waco
3Jannifer Stimmel
F  -  3:00 pm - 3:55 pm
F  -  1:00 pm - 2:50 pm
F  -  8:00 am - 11:40 am
Waco
Course Credits:   3
Course Description:
An introduction to current refinishing products, equipment and procedures used in the automotive refinishing industry on damaged panels. Emphasis on surface preparation, corrosion protection, masking techniques, masking techniques, block sanding techniques, and refinishing repaired panels.
Instructor:   Jannifer Stimmel
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 3 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureFridays3:00 pm - 3:55 pm
1FC1, room 107
Hands-On LabFridays1:00 pm - 2:50 pm
1ARL, room 101
Hands-On LabFridays8:00 am - 11:40 am
1ARL, room 101
ABDR-1371-20H1Basic Paint Tchnqs, Eqpt Envn
ABDR-1371-20H1
Basic Paint Tchnqs, Eqpt Envn
Harlingen
3Juan Sanchez
MT  -  8:30 am - 9:30 am
WThF  -  8:30 am - 11:30 am
Harlingen
Course Credits:   3
Course Description:
An introduction to current refinishing products, equipment and procedures used in the automotive refinishing industry on damaged panels. Emphasis on surface preparation, corrosion protection, masking techniques, masking techniques, block sanding techniques, and refinishing repaired panels.
Instructor:   Juan Sanchez
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 2 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureMondays and Tuesdays8:30 am - 9:30 am
2RS1, room RS23
Hands-On LabWednesdays, Thursdays and Fridays8:30 am - 11:30 am
2RS1, room RS23
ABDR-1419-1001Basic Metal Repair
ABDR-1419-1001
Basic Metal Repair
Waco
4Tracy Marshall
F  -  8:00 am - 9:50 am
F  -  10:00 am - 11:50 am
F  -  1:00 pm - 4:40 pm
WacoCourse Syllabus
Course Credits:   4
Course Description:
Covers basic metal principles and working techniques including proper tool usage and product application.
Instructor:   Tracy Marshall
Starting Date:   January 13, 2020
Ending Date:   May 01, 2020
Length:   16 weeks
Course Prerequisites:
None
Course Schedule:
This class has 3 meeting times per week.
A meeting time is a time period that can be once a day or the same time period repeated over multiple days in a week.
LectureFridays8:00 am - 9:50 am
1TTC, room 119
Hands-On LabFridays10:00 am - 11:50 am
1ACR, room 100
Hands-On LabFridays1:00 pm - 4:40 pm
1ACR, room 100
Syllabus:
2454 Total Courses
Course Filter
Use shift and control for multiple campuses
MondayTuesday
WednesdayThursday
FridaySaturday
Sunday
Search

Archive Curriculum Vitae

Curriculum Vitae Requirements:

Texas State Technical College curriculum vitae made public on the institution’s Internet website for each regular instructor must list the instructor’s postsecondary education, teaching experience and significant professional publications.

Curriculum vitae made public on the institution’s website may not include personal information, including the instructor’s home address or home telephone number.

Texas Genuine Logo
Texas State Technical College 3801 Campus Drive Waco, Texas 76705 254-799-3611
© 2019 Texas State Technical College
Feedback